Your free online estimate

Please select a product...

Now Select the product you're interested in...

Worktop Styles & Measurements

STRAIGHT

L-SHAPE / GALLERY

U-SHAPE & ISLAND

U-SHAPE

L-SHAPE

CUSTOM

	Length	Width
Piece A	mm	mm

Thickness

Select your worktop thickness here*.

* You will need to reselect your extras below on changing thickness.

Edge Finish

Bevel

Bullnose

Chamfer

Pencil Round Edge

Click the edge finish you require and input the total length needed. (mm)

Length

Splashback

This is the panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the work surface to the underside of the wall units. Measure the length (mm) and height (mm) of each splashback piece that you require and input them into the boxes.

	Length	Width
Piece 1	mm	mm

Upstands

These can be used instead of tiling the walls. Measure the total length of upstands required. Quote based on 100mm high 20mm thickness granite.

Total Lengthmm

Measurements need to be in mm.

Polished Cut Out

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

Total Cut outs

Measurements need to be in mm.

Drainer

These are five straight grooves (1 set) in the worktop at one side of the sink which act as a draining board. (1 Set = 5 Grooves)

Tap Holes

These are the cut-outs for taps and switch holes, i.e. waste disposal.

Unpolished Cut Out

These are the cut-outs with an unfinished inner edge that will not be visible, i.e. for hobs and surface mounted sinks etc.

Additional Holes

For electric sockets, pipe cut-outs etc

Polished Edges

These are the edges of the worktop that will be visible and will need polishing. Based on straight edge polish with chamfer*. (*Other edge finishes available)

Total Lengthmm

Measurements need to be in mm.

Free Sample?

Check this box If you would like a free sample..

Your Details

NameAddress 1Address 2Town / CityPostcode

Upload your own plans *OPTIONAL*

file types: PDF, JPEG, PNG

Please note this is an Estimate only.
We would need to see your Kitchen plan and verify sizes before we can send you an official quote.
Dimensions as per your enquiry, exact sizes to be agreed on the site survey/template.
All pricing will be based on final measurements, as estimates do not always match actual measurements taken during the template phase.
You will be notified if there is a change prior to material being ordered.

Your Details

NameCompanyMobile / Primary NumberPostcodeEmail Address

Please note we DO NOT pass your information on to any third parties.

Do you need Template & Fitting?When is your kitchen ready?Notes

Tel: 01302 741709

Opening hours

Mon-Fri: 8.30am-5pm
Sat: 9am-4pm

Style STRAIGHT

Worktops

Thickness

Edge Shape

Edge Length

Splashback

Additional Holes

Polished Edges

Unpolished Cut Out

Tap Holes

Drainer

Polished Cut Out

Upstands

Shipping Both

Your free online estimate

Please select a product...

Worktop Styles & Measurements

Thickness

Select your worktop thickness here*.

Edge Finish

Click the edge finish you require and input the total length needed. (mm)

Splashback

Upstands

Polished Cut Out

Drainer

Tap Holes

Unpolished Cut Out

Additional Holes

Polished Edges

Free Sample?

Your Details

Your Details

Sign up to our newsletter