Your free online estimate

Silestone Quartz Merope Polished Made to Measure 30mm

Silestone Quartz Merope Polished Made to Measure 30mm

Please Select a product category from the list
Now Select the product you're interested in...

Straight
 
U-shape & Island
 
U-shape
 
L-shape
 
Custom
 

Thickness

thickness
Select your worktop thickness here.*

* You will need to reselect your extras below on changing thickness.
  Length   Width
Piece
A
mm
X
mm
Piece
B
mm
X
mm
Add Another

Click the edge finish you require above and input the total length needed. (mm)
length

This is the panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the work surface to the underside of the wall units. Measure the length (mm) and height (mm) of each splashback piece that you require and input them into the boxes.

  Length   Width
Piece
1
mm
X
mm
Add Splashback

These can be used instead of tiling the walls. Measure the total length of upstands required. Quote based on 100mm high 20mm thickness granite.

Total Length
mm
Measurements need to be in mm.

These are the cut-outs for under mounted sinks etc, that require the inner exposed edges to be polished because they will be visible.

These are five straight grooves (1 set) in the worktop at one side of the sink which act as a draining board. (1 Set = 5 Grooves)

These are the cut-outs for taps and switch holes, i.e. waste disposal.

These are the cut-outs with an unfinished inner edge that will not be visible, i.e. for hobs and surface mounted sinks etc.

For electric sockets, pipe cut-outs etc

These are the edges of the worktop that will be visible and will need polishing. Based on straight edge polish with chamfer*. (*Other edge finishes available)

Total Length
mm
Measurements need to be in mm.

Check this box If you would like a free sample..
Upload your own plans *OPTIONAL*

file types: PDF, JPEG, PNG

Please note this is an Estimate only.
We would need to see your Kitchen plan and verify sizes before we can send you an official quote.
Dimensions as per your enquiry, exact sizes to be agreed on the site survey/template.
All pricing will be based on final measurements, as estimates do not always match actual measurements taken during the template phase.
You will be notified if there is a change prior to material being ordered.
Unfortunately we don't cover your area at the moment but we are looking to incorporate your area in the near future. We apologise for any inconvenience caused.

Your Details

Please note we DO NOT pass your information on to any third parties.
Do you need Template & Fitting?
When is your kitchen ready?
Notes
Tel: 01302 741709
Opening hours
Mon-Fri: 8.30am-5pm Sat: 9am-4pm
Style
Custom
Worktops
0 mm X 0 mm
0 mm X 0 mm
Thickness
20mm
Edge Shape
Bevel Edge
0 M
Splashback
0 mm X 0 mm
Shipping:
Both