Length: 2050mm, Width: 670mm, Thickness: 40mm
£99.00 Inc VAT.
RRP: £133.19 | Fast UK Delivery
£40.00 Standard Delivery
No Matter How Many Products You Order
You Will Only Pay 1 Delivery Charge.
Click On The Sizes Above To Expand Selection.
This Duropal Laminate Breakfast Bar Has A Gorgeous Anthracite Peru Pattern With A Top Face Finish. Dimensions: 2050mm X 670mm X 40mm
Duropal worktops are the perfect alternative to acrylic based, granite or stone worktops at as fraction of the price. A comprehensive selection of decors offers opportunities from the most modern to the more traditional. Duropal worktops are surfaced with genuine high-pressure laminate guaranteed to DIN-EN 438; hardwearing and easy to clean. Featuring moisture and heat resistant, the postformed front edge of Duropal worktops is designed to help prevent liquid spills finding their way into drawers and cupboards. Duropal Anthracite Peru is universally applicable neutral and ideal surface, which is a classic for worktops as this surface is particularly resistant to fingerprints. Anthracite Peru is available in Classic profile, long established and highly regarded as a consistent performer. Duropal Worktops are certified by PEFC which guaranteeing that it comes from properly environmentally managed and sustainable sources. All Duropal Worktops come with a unique seal designed to ensure a lifetime of protection against moisture and steam. General Specifications: Quality: Duropal worktops are manufactured with to the highest standards and all material carries the PEFC certification. The core of Duropal worktops is E1 grade high density particle board manufactures from a mixture comprising resin and small wood chips, pressed to make a large sheet, these layers will reveal in a cut section. Small particles form the outer surfaces and the core is made from larger chips. This structure gives strength, retains fittings, allows machining and provides an excellent surface for adhesion to High Pressure Laminate. Heat Resistant: Duropal worktops are highly heat resistant, Burning a cigarette on the surface is one of the quality tests specified in DIN-EN 438. However, it is recommended that always place hot pans, ovenware and irons on a trivet or protective pad to protect the surface from the intense heat which can cause damage to the worktop if placed directly on the surface. Also, please avoid placing electric kettles, coffee machines and deep fat fryers directly over worktop joints; constant changes in temperature could lead to failure of the joint. Scratching: Duropal made from Melamine resin which is the hardest of all synthetically produced organic materials. This is the reason for the high scratch and wear resistance of Duropal. Though Duropal is scratch resistant but not scratch proof; Please do not cut or chop directly on the worktop surface â€“ always use a chopping board or worktop saver. Staining: Duropal worktops are resistant to most common household chemicals or foodstuffs, due to the elasticity of phenolic resin . Some items may cause staining. For good practice, it is recommended that any spillage is wiped off immediately. Moisture: The Glue-line technology of Duropal worktops guaranteed moisture resistance. Duropal come with a unique seal designed to ensure a lifetime of protection against moisture and steam. Cleaning: A major advantage of Duropal Worktops is that the surface is so simple to clean. Usually a moist cloth is sufficient, but use washing-up liquid to get rid of any grease. Stubborn dirt can be removed with an organic solvent such as methylated spirits or alcohol. The use of abrasive cleaners and pads, corrosive or aggressive cleaning agents should be avoided as they will have a detrimental effect on the worktop surface.
40mm postformed long edge 6mm radius Classic profile Heat, stain and impact resistant High scratch and wear resistance FIRA Gold Award for products excellence Hardwearing and easy to clean Durable and hygienic with many decor options available at a reasonable price All Duropal material carries the PEFC certification Genuine high-pressure laminate guaranteed to DIN-EN 438 Available in worktop, breakfast bar, splashback and upstand Matching accessories available
Hob & Sink cutouts: Granite sink / hob cut outs are barred front & back (fitting of steel support bars to give additional support to cutouts), Without steel supports bars, the length of a cut out is reduced considerably. Large cut outs need to be scored and cored on occasions. This leaves the corners of the cutout in place, ready for removal on-site by the installer. Granite is susceptible to ‘blowing out’. This occurs when contact is made with the material whilst cutting or grinding. This is very common in large particled granite. ie. we fill and seal the affected areas with epoxy resin (colour may vary) to ensure the material is not left with any sharp edges or ‘chips’.
A minimum of 120mm is required between two hob cutout, 100mm is required between hob and sink cutouts, 70mm is required between two sink cutouts and sink cutouts are placed 50mm from the worktop front edge.
Stainless Steel Sinks: Please specify the preferred undermounting of Stainless Steel Sinks. Silicone sealant may be rendered ineffective when plumbing the sink in, it is important that the sink is re-sealed by the plumber, or the 12 months guarantee will be invalid if the work is not carried out. If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.
Joints: Granite joints are finished with a small ariss to the top edge. Silicone sealant is applied to prevent water ingression.
Overhangs & Supports: Any overhang extending more than 300mm must be supported.Handling: For installations you will need additional labour on worktops weighing above 150kg. Every additional 75kg requires an extra person to assist with lifting. Due to the weight of granite, please ensure that your units are level and securely fixed.Drainer Grooves: Drainer grooves and recessed drainers may be duller than the rest of the polished surface. Colour matching is not always possible as granite can vary dramatically throughout each scant.Points of Note: Hob flanges need to sit on aluminium thermal insulation tape around the cut-out to avoid conducting excess heat & causing cracks in the worktop.Regular use of your Care & Maintenance Kit should ensure that your worktop always looks good.
If you want to return your product bought from HCSupplies you have until the seventh day after delivery of the item to let us know in writing that you would like to return your item for a refund. Please send us an email to [email protected] or write to us at our address on our contact page. This however does not apply to any item(s) from our kitchen worktops range. For example, kitchen worktops, breakfast-bars, splashbacks and upstands cannot be returned.
In the unlikely event your product arrives damaged or is faulty please contact us to arrange a replacement or refund. Worktops need to be checked on delivery and refused if any damage is present. For all other items please open and check your items as soon as possible and notify us within 24 hours of delivery if there are any damages.
Please note that although that every effort has been made to ensure that the image on this page represents the product as best it can, all screens display colours differently due to a variety of reasons such as the type of screen and the settings. Therefore, we always recommend that you request a free worktop sample. Laminate samples can be requested by clicking here. If you require a sample of a worktop that is not a laminate worktop then please contact the manufacturer directly. Please allow 5-10 working days for sample requests due to the large volume of requests that we receive.
All products should be checked for any damage on delivery and solid surface products should be checked for colour consistency prior to installation. Any claims after installation relating to colour inconsistency are not covered by the product warranty.
Please note that items from the following brands/ranges are made to order and therefore once an order is placed a cancellation is not possible: Apollo Magna, Apollo Quartz, Apollo Slabtech, Corian, Granite Worktops, Silestone, Zodiaq and Wood Worktops.