Length: 3000mm, Width: 900mm, Thickness: 50mm
£264.16 Inc VAT.
Sorry, This Product Is No Longer Available.
Click On The Sizes Above To Expand Selection.
Why Not Add One Of These Popular Accessories To Your Basket?
This Wilsonart Laminate Breakfast Bar Has A Elegant Romantic Walnut Pattern With A Extra Matt Finish. Dimensions: 3000 X 50 X 900mm
Wilsonart are a well known branded name throughout the worktop industry for excellent quality and value. Wilsonart worktops have a leading legacy for producing best products for you kitchen. Wilsonart boast an outstanding range of worktops which include the Romantic Walnut Extra Matt Breakfast Bar. The homely Wilsonart Romantic Walnut Laminate Breakfast Bar will occupy pride of place in any kitchen. Evocative and exclusive they lead the way in innovation and design through years of experience. Furthermore, these breakfast bar don't just look good but they are built with care and dedication to the highest of standards using only the finest raw materials. The Romantic Walnut Breakfast Bar features a durable extra matt finish that has heat, impact and stain resistant properties. PUR under-edge seal & back edge glue seal creates a water resistant barrier, reducing the risk of water ingress which provide longevity in performance of the breakfast bar. Faced with a high pressure laminate that's manufactured to the BS EN438 standard plus a FIRA Gold Award for product excellence. Long lasting surface suitable for the hard-wearing kitchen environment and easy installation save time and money. This breakfast bar is 50mm thick, 900mm deep and 3000mm long with a rounded edge. Matching accessories are also available separately. General Care Instructions: Cleaning: Wilsonart does not require any specialist cleaning, use mild soaps and detergents for general cleaning. Wipe them across the surface with a a standard dishcloth or sponge. Make sure to rinse them with water afterwards. Don't spread hair dyes or textile dyes on your worktop as these can leave a permanent stain behind. If you do happen to spill these, wipe them up immediately and treat the area with detergent. Use something a little stronger for tough stains, like tea and coffee. White spirit is a suitable cleaning product. Avoid using abrasive pads like steel wool on your worktops. Storing them on the worktop is also ill-advised because they can rust and leave stains behind. Don't use cleaners containing lye, sometimes known as caustic soda, as these will also damage your worktop. Remove them immediately if used or spilled and rinse the area repeatedly with water. Heat: Although laminate worktops are designed to be heat resistant, they can melt if exposed to excessive heat for too long. However, all hot pots, pans and other heat generating devices should always be placed upon a trivet or worktop protector rods. Minor Scratching: Using sharp knives on the worktop can be damaged by scratching or cutting. So, use chopping boards to cut vegetables, meat and other foods. Wilsonart Worktop Installation & Care Guide
Extra Matt finish Romantic Walnut Pattern FIRA Gold Award for product excellence Faced with high pressure laminate manufactured to EN438 Wrap-round profile providing greater moister resistance Heat, impact and stain resistant surface Forgiving to stains and marks Made using moisture resistant bonding adhesive Sealed on the back edge for additional moisture resistance Resin impregnated backing paper to protect from moisture and prevent warping
Hob & Sink cutouts: Granite sink / hob cut outs are barred front & back (fitting of steel support bars to give additional support to cutouts), Without steel supports bars, the length of a cut out is reduced considerably. Large cut outs need to be scored and cored on occasions. This leaves the corners of the cutout in place, ready for removal on-site by the installer. Granite is susceptible to ‘blowing out’. This occurs when contact is made with the material whilst cutting or grinding. This is very common in large particled granite. ie. we fill and seal the affected areas with epoxy resin (colour may vary) to ensure the material is not left with any sharp edges or ‘chips’.
A minimum of 120mm is required between two hob cutout, 100mm is required between hob and sink cutouts, 70mm is required between two sink cutouts and sink cutouts are placed 50mm from the worktop front edge.
Stainless Steel Sinks: Please specify the preferred undermounting of Stainless Steel Sinks. Silicone sealant may be rendered ineffective when plumbing the sink in, it is important that the sink is re-sealed by the plumber, or the 12 months guarantee will be invalid if the work is not carried out. If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.
Joints: Granite joints are finished with a small ariss to the top edge. Silicone sealant is applied to prevent water ingression.
Overhangs & Supports: Any overhang extending more than 300mm must be supported.Handling: For installations you will need additional labour on worktops weighing above 150kg. Every additional 75kg requires an extra person to assist with lifting. Due to the weight of granite, please ensure that your units are level and securely fixed.Drainer Grooves: Drainer grooves and recessed drainers may be duller than the rest of the polished surface. Colour matching is not always possible as granite can vary dramatically throughout each scant.Points of Note: Hob flanges need to sit on aluminium thermal insulation tape around the cut-out to avoid conducting excess heat & causing cracks in the worktop.Regular use of your Care & Maintenance Kit should ensure that your worktop always looks good.
If you want to return your product bought from HCSupplies you have until the seventh day after delivery of the item to let us know in writing that you would like to return your item for a refund. Please send us an email to [email protected] or write to us at our address on our contact page. This however does not apply to any item(s) from our kitchen worktops range. For example, kitchen worktops, breakfast-bars, splashbacks and upstands cannot be returned.
In the unlikely event your product arrives damaged or is faulty please contact us to arrange a replacement or refund. Worktops need to be checked on delivery and refused if any damage is present. For all other items please open and check your items as soon as possible and notify us within 24 hours of delivery if there are any damages.
Please note that although that every effort has been made to ensure that the image on this page represents the product as best it can, all screens display colours differently due to a variety of reasons such as the type of screen and the settings. Therefore, we always recommend that you request a free worktop sample. Laminate samples can be requested by clicking here. If you require a sample of a worktop that is not a laminate worktop then please contact the manufacturer directly. Please allow 5-10 working days for sample requests due to the large volume of requests that we receive.
All products should be checked for any damage on delivery and solid surface products should be checked for colour consistency prior to installation. Any claims after installation relating to colour inconsistency are not covered by the product warranty.
Please note that items from the following brands/ranges are made to order and therefore once an order is placed a cancellation is not possible: Apollo Magna, Apollo Quartz, Apollo Slabtech, Corian, Granite Worktops, Silestone, Zodiaq and Wood Worktops.